top of page

Roundhouse 422 Santa Fe 0-6-0 Saddle Tank Switcher Locomotive Kit HO Scale

Out of stock
Product Details

Roundhouse 422 Santa Fe 0-6-0 Saddle Tank Switcher Locomotive Kit

There is no greater accomplishment, or satisfaction, than in building something yourself. Fortunately, in this era of supplied entertainment, where accomplishment is often measured by how many levels have been completed, vintage locomotive kits from Roundhouse, Mantua and Tyco still offer the challenge, and opportunity, to create your own unique model railroading masterpiece. You will find no greater selection of these great kits from a bygone era than here at MRRHQ's Vintage Model Steam Locomotive Works.

Excerpt from included Roundhouse 422 documents:

"This model is patterned after the 0-6-0 saddle tank type locomotive built by the Baldwin Locomotive Works ( circa 1890-1930 ). The water that is to be heated and used for steam is carried in a tank that is wrapped around the top of the boiler. Fuel is carried in the bunker at the rear. Primarily intended for general service it was used for short distance hauling and for yard duty as a switcher. Its' range was limited by its' supply of water and fuel. It was at home in a small yard within easy reach of fuel and water. A small single door enginehouse in a corner of the yard served as home as well as a place to do light repairs and maintenance and doubling as a yard office and crew quarters.

The saddle tanker saw service on many industrial lines with their sharp curves and short sidings tucked away in the factory parts of town. It was used by logging railways and mining lines to haul loaded cars from the camps at the end of the lines to the mills on the main lines."


  • New, Mint Condition in Mint Original Box.
  • Certified 100% Complete by MRRHQ Vintage Steam Locomotive Works.
  • Inventoried and sealed in custom-fitted air tight heavy zip lock bag.
  • All small parts sealed in original plastic bags.
  • All original Instructions are present including History, Pre-Assembly, Superstructure Assembly, Parts List and Painting.
  • Powerful Serviced, Tested, and Sealed 5-Pole Motor w/Brass Worm Gear.
  • Long lasting Nylon Drive Gear.
  • Scale 51" Baldwin Drive Wheels.
  • Heavy cast metal main and tender frame assemblies.
  • Cast cylinders, yoke, main rods and crosshead.
  • Brass guide rods and side rods.
  • All screws, headlamp jewels and other parts needed to complete the kit are included.
  • Available Option: Front and rear all metal Kadee Knuckle Couplers.
  • Paperwork Undated. Actual duration of production run is also unknown.
  • This is a great introductory kit for beginning modelers.

HO Scale 1:87

Made in U.S.A.

Questions? Need advice? The modelers from MRRHQ are ready to help 24/7 @970-988-2866 or email us

Save this product for later
bottom of page